Keysight Technologies B2961A - Page 93

Keysight B2961A/B2962A SCPI Command Reference, Edition 6 2- 53
Subsystem Command Summary
Controlling Source/Measure Trigger
:LXI:EVEN[:OUTP]:LAN:COUN?
Returns an integer as the number of
configured LXI output LAN events.
:LXI:EVEN[:OUTP]:LAN:DIS:ALL
Disables all configured LXI output LAN
events.
:LXI:EVEN[:OUTP]:LAN:LIST?
Returns a quoted string containing a list
of all configured LAN output event
names.
:LXI:EVEN[:OUTP]:LAN:REM:ALL
This command is ignored.
:LXI:EVEN[:OUTP]:LAN:REM event
This command is ignored.
:LXI:EVEN[:OUTP]:LAN:SEND event,
type
Forces the instrument to send the
specified output event.
event: LAN event name
type=RISE|FALL
:LXI:EVEN[:OUTP]:LAN[:SET]:CONF
event,status,source,slope,drive,
destination
Configures the most common attributes
of LXI LAN output events.
event: LAN event name
status: Status
source: Event name
slope: Slope attribute
drive: Drive behavior
destination: Destination
:LXI:EVEN[:OUTP]:LAN[:SET]:DEST
event,destination
:LXI:EVEN[:OUTP]:LAN[:SET]:DEST?
event
Sets the destination for the specified
outgoing LAN event to the hosts
specified by destination.
event: LAN event name
destination: Destination
"ALL:5044"
Command Summary Reset setting