Keysight B2961A/B2962A SCPI Command Reference, Edition 6 2- 55
Subsystem Command Summary
Controlling Source/Measure Trigger
:LXI:EVEN[:OUTP]:LAN[:SET]:TSD e
vent,delay
:LXI:EVEN[:OUTP]:LAN[:SET]:TSD?
event
Sets the delay that occurs between the
generation of the specified event and the
remote instruments action on it.
The
delay time must be zero.
event: LAN event name
delay: Delay time, in seconds
0
:LXI:IDEN[:STAT] mode
:LXI:IDEN[:STAT]?
Changes the LXI status indicator state.
mode=0|OFF|1|ON
OFF
:LXI:MDNS:ENAB mode
:LXI:MDNS:ENAB?
Enables or disables mDNS (multicast
DNS) function.
mode=0|OFF|1|ON
ON
:LXI:MDNS:HNAM[:RES]?
Returns the resolved mDNS hostname.
:LXI:MDNS:SNAM:DES name
:LXI:MDNS:SNAM:DES?
Sets the desired mDNS service name.
name: Desired mDNS service name
"A-B29xxA-
xxxx"
:LXI:MDNS:SNAM[:RES]?
Returns the resolved mDNS service
name.
:TRIG:LXI:LAN[:SET]:DEL delay
:TRIG:LXI:LAN[:SET]:DEL?
Delay time must be zero.
delay: Delay time, in seconds
0
:TRIG:LXI:LAN[:SET]:DET event,de
tect
:TRIG:LXI:LAN[:SET]:DET? event
Specifies the behavior of the trigger
signal.
event: LAN event name
detect=RISE|FALL|HIGH|LOW
RISE
Command Summary Reset setting
To Next Page
Loading...
