3 Using P-Series Power Sensor
162 Keysight N1911A/1912A User’s Guide
Improving the accuracy with additional settings
You can now return to the setup menus and adjust the default setting to obtain
greater measurement accuracy.
Channel Setup
Press . The Channel Setup screen is displayed. If using an N1912A, select
the channel you want to configure.
Figure 3-8 P-Series power sensor default channel setup
Use the , , , and keys to highlight the setting field and press
to configure the setting. For further detail on these settings, refer to the
appropriate sections.
Meas Avg: “Setting Measurement Averaging” on page 78
Video Avg
: “Setting the Video Averaging” on page 82
Step Detec
t: “Step Detection” on page 81
Video B/W
: “Setting the Video Bandwidth” on page 84
For E-Series E9320 power sensors range settings, only UPPER and LOWER
ranges are available in Normal and Triggered mode.
To Next Page
Loading...
Need help?
General
