Keysight N1911A User Manual

Using N8480 Series Power Sensors 8
Keysight N1911A/1912A User’s Guide 243
Selecting a sensor calibration table
You can select a calibration factor table from the key menu followed by
and .
The State column indicates if any calibration factor tables are currently selected.
The Sensor Tbls screen is shown in Figure 8-8.
Procedure
Select sensor calibration table as follows:
1 Press , , .
2 Use the and keys to highlight one of the 20 table titles and press
to highlight .
Tables
Sensor Cal Table
NOTE
You can also view which sensor table is being used by pressing the ,
and use the and keys to highlight the CF Table setting field and
press to display the table.
Offset
Tables
Sensor Cal Tables
Table
On

Keysight N1911A Specifications

General

Brand	Keysight
Model	N1911A
Category	Measuring Instruments
Language	English