General Power Meter Functions 2
Keysight N1911A/1912A User’s Guide 63
6 Press the , , key to highlight the Rel field.
7 Press and the original result value will appear on the right hand side of
the Rel check field.
8 The relative value displayed under Result field will change as the measured
signal varies.
If you return the power meter to display the numeric display, a Rel symbol will
be displayed in the measurement window it is applied to.
Figure 2-3 Numeric display
The Rel symbol is not displayed when the associated measurement is displayed
in Dual Numeric or Analog format.
To Next Page
Loading...
