General Power Meter Functions 2
Keysight N1911A/1912A User’s Guide 59
Selecting units of measurement from the softkeys
In some menus, for example, units in the Trace Setup menu, you are required to
enter the units of measurement for power. In some cases, due to the availability of
wide power range, the following menu is displayed:
Pressing or increases or decreases the
multiplier shown in front of .Pressing after the correct multiplier has been
selected confirms the entry.
mW
μW
nW
2 of 2
W
Increment
multiplier
Decrement
multiplier
Cancel
Invalid softkeys are grayed out so the value cannot be entered.
To Next Page
Loading...
