1Introduction
44 Keysight N1911A/1912A User’s Guide
Figure 1-6 Trace display in single enlarged window in trigger delay mode
Figure 1-6 shows a single enlarged window with the Gate Ctrl menu and
associated tables and trigger delay.
30 Pressing removes the gate markers and displays the trigger
marker(s). The indicates when the trigger event occurs, whilst shows the
delayed trigger point. When the two points coincide only the trigger is
shown.
In the example shown in Figure 1-6, the appears ahead of the as a
trigger delay of –5.00 µs has been configured, placing the measurement
trigger before the trigger event. You can configure the trigger delay by
pressing and entering a numeric value.
To indicate an off-screen trigger event, is displayed. To indicate an
off-screen trigger point, is displayed.
31 The selected channel and gate number is displayed.
32 The trigger setting and slope is displayed. Examples shown in Figure 1-6 are
Internal Channel A and a Positive Slope.
To Next Page
Loading...
