1Introduction
52 Keysight N1911A/1912A User’s Guide
Figure 1-10 Status message before Toggle ID is selected.
Figure 1-11 Status message when Toggle ID is selected.
When power meter is configured to LAN, the Lan Status on
screen will show the LAN error condition and status of the LAN configuration
connection. There are six types of Lan Status messages that may occur. See
Table 1-1. See also Figure 1-12 for the example of Lan Status message.
Status message
“LAN identity start” to
blink 3 times when
Toggle ID is selected.
To Next Page
Loading...
