Keysight N1911A

2 General Power Meter Functions
76 Keysight N1911A/1912A User’s Guide
3 Highlight the table title using the and keys. Press and use the
, , and keys to select and change the characters in the Table
Name pop-up to create the name you want to use.
Figure 2-16 Edit table title pop-up
Pressing adds a new character to the right of the selected character.
Pressing removes the selected character.
4 Press to complete the entry.
Change
Insert Char
Delete Char
Enter
NOTE
The following rules apply to naming sensor calibration tables:
– The name must consist of no more than 12 characters.
– All characters must be upper or lower case alphabetic characters, or numeric
(0-9), or an underscore (_).
– No other characters are allowed.
– No spaces are allowed in the name.