General Power Meter Functions 2
Keysight N1911A/1912A User’s Guide 81
Step Detection
To reduce the filter settling time after a significant step in the measured power the
filter can be set to re-initialize upon detection of a step increase or decrease in the
measured power. Step detection can be set in both manual and automatic
measurement average modes.
Procedure
Set step detection as follows:
1 Press . On dual channel meters select the required channel.
2 Use the and keys to select the Step Detect setting field.
3 Press to check the step detection to on or off.
4 Press key to close the Channel Setup screen.
To Next Page
Loading...
