Keysight N1911A

1Introduction
34 Keysight N1911A/1912A User’s Guide
These keys are located along the lower edge of the display.
Key Function
Press this key to access general configuration-menus, such as GPIB address. You
can also access the Self-Test and Table entry menus. The measurement screen
remains visible.
Press this key to access the channel configuration menus. Channel parameters such
as averaging and offsets are configured from this menu.
Press this key to access the triggering menu. Unless a P-Series or an E-Series
E9320A Sensor is connected, all the menu keys are disabled (grayed out).
Press this key to setup relative measurements or set display offsets.
Use this key to configure the selected measurement.
Press this key to access the measurement display menu. You can choose the
displayed measurement resolution, units and display format.
Use this key together with to configure measurement displays.