2 General Power Meter Functions
72 Keysight N1911A/1912A User’s Guide
Selecting a frequency dependent offset table
You can select a frequency dependent offset table from the key menu
followed by and .
The State column indicates if any frequency dependent offset tables are currently
selected. The Offset Tables screen is shown in Figure 2-13.
Procedure
Select an offset table as follows:
1 Press, either:
a , , .
b , and use the and keys to highlight the FDO Table
setting field and press to display the table.
You can also view which FDO table is being used by pressing the ,
and use the and keys to highlight the FDO Table setting field and
press to display the table.
To Next Page
Loading...
