Keysight N9038A Service Guide

126 Keysight N9038A MXE Service Guide
Instrument Messages
Condition Messages
Condition Errors 601 to 699, Error Summaries
This series of errors corresponds to the bits in the STATus:QUEStionable
register, read with a STATus:QUEStionable? event query or a
STATus:QUEStionable:CONDition? query.
The second column in the table shows the corresponding bit in the status
register. These bits do not have any corresponding error messages, although
error numbers have been reserved for them as seen in the Err# column; they
are status bits only.
The bits in the STATus:QUEStionable register are “summary bits” for
registers at a lower level. Note that these summary bits summarize the state
and history of the event registers at the lower level. This is true even for bits in
the STATus:QUEStionable condition register. This means that:
— The summary bits read by the STATus:QUEStionable: CONDition?
query are true if any event bits are set in any of the :QUEStionable
sub-registers :POWer, :TEMPerature, FREQuency, CALibration or :INTegrity.
— The summary bits read by the STATus:QUEStionable? event query are
true if any event bit has undergone a false-to-true transition with the
PTRansition filter set, or a true-to-false transition with the NTRansition filter
set, in any of the :QUEStionable sub-registers :POWer, :TEMPerature,
FREQuency, CALibration or :INTegrity.
Thus, the summary bits cannot be used to determine the current state of a
lower level condition bit; only the state and history of the lower level event bits.
523 11 unused
525 12 unused
527 13 unused
529 14 unused
Err# Bit in
status
register
Message Error or
Warning
More Information
Err# Bit in
status
register
Message Error or
Warning
More Information
601 0 unused
603 1 unused
605 2 unused
607 3 Power status bit
only
This bit is the summary bit for the
STATus:QUEStionable:POWer sub-register.

Keysight N9038A Specifications

General

Brand	Keysight
Model	N9038A
Category	Measuring Instruments
Language	English