584 Keysight N9038A MXE Service Guide
Assembly Replacement Procedures
LISN Control Assembly
Replacement
1. Refer to Figure 18-43. Lift the board extractors on the LISN Control
assembly and insert it into the same slot in the chassis and press down to
plug it into the motherboard.
2. Reattach cable W9 to the LISN Control assembly.
3. Replace the top brace. Refer to the Top Brace and Power Supply Bracket
replacement procedure.
4. Replace the instrument outer case. Refer to the Instrument Outer Case
replacement procedure.
To Next Page
Loading...
Need help?
General
