Keysight N9038A Service Guide

78 Keysight N9038A MXE Service Guide
Instrument Messages
Event Messages
–800, Operation Complete Event
–700, Request Control Event
–600, User Request Event
–500, Power on Event
–400 to –499, Query Errors
Err# Message Verbose/Correction Information
–800 Operation complete The instrument has completed all selected pending operations in accordance
with the IEEE 488.2, 12.5.2 synchronization protocol
Err# Message Verbose/Correction Information
–700 Request control The instrument requested to become the active IEEE 4881
controller-in-charge
Err# Message Verbose/Correction Information
–600 User request The instrument has detected the activation of a user request local control
Err# Message Verbose/Correction Information
–500 Power on The instrument has detected an off to on transition in its power supply
Err# Message Verbose/Correction Information
–400 Query Error There was a problem with a query command. The exact problem cannot be
specifically identified
–410 Query INTERRUPTED Some condition caused an INTERRUPTED query to occur. For example, a query
was followed by DAB or GET before a response was completely sent
–420 Query UNTERMINATED Some condition caused an UNTERMINATED query to occur. For example, the
device was addressed to talk and an incomplete program message was
received
–430 Query DEADLOCKED Some condition caused a DEADLOCKED query to occur. For example, both the
input buffer and the output buffer are full and the analyzer cannot continue. The
analyzer automatically discards output to correct the deadlock
–440 Query UNTERMINATED
after indefinite
response
A query was received in the same program message after a query requesting an
indefinite response was executed

Keysight N9038A Specifications

General

Brand	Keysight
Model	N9038A
Category	Measuring Instruments
Language	English