527
Keysight Technologies X-Series Signal Analyzers
N9038A MXE Signal Analyzer
Service Guide
18 Assembly Replacement Procedures
What You Will Find in This Chapter
Procedures in this chapter enable you to locate, remove, and replace the
following major assemblies in your instrument.
Refer to Chapter 17, “Replaceable Parts” for part numbers, assembly
descriptions, and ordering information.
Instrument Outer Case on page 532
Top Brace and Power Supply Bracket on page 534
RF Area - Option 503, 508, & 526 on page 536
RF Area - Option 544 on page 554
RF Front End Assembly on page 570
Front End Control Assembly on page 575
LO Synthesizer Assembly on page 577
Radiated Filter Assembly on page 579
RF Preselector Input Assembly on page 581
Conducted Filter Assembly on page 582
LISN Control Assembly on page 583
Wideband Analog IF and Wideband Digital IF Assemblies on page 585
Reference Assembly on page 587
Midplane Board Assembly on page 589
Rear Panel on page 591
Power Supply Assembly on page 593
CPU Assembly on page 595
Disk Drive on page 596
AIF/DIF Assembly on page 602
Motherboard Assembly on page 606
W35 Removal on page 613
To Next Page
Loading...
Need help?
General
