Keysight N9038A Service Guide

Keysight N9038A MXE Service Guide 129
Instrument Messages
Condition Messages
Condition Errors 801 to 899, Temperature
This series of errors corresponds to the bits in the
STATus:QUEStionable:TEMPerature register. The second column in the
table shows the corresponding bit in that register.
An event with the error number shown in the table means the condition has
been detected. When the condition is cleared, an event with the error number
plus 1000 is generated. These error numbers can be viewed in the Show Errors
screen, along with the DETECTED and CLEARED indicators.
For example, error 801 indicates that the Ref Osc Oven Cold condition has
been detected; error 1801 indicates that condition has been cleared.
This register is summarized as bit 4 of the STATus:QUEStionable register, as
described in the section “Condition Errors 601 to 699, Error Summaries” on
page 126.
Err# Bit in
status
register
Message Error or
Warning
More Information
801 0 Reference Oscillator Oven
Cold
W (not currently in use)
803 1 unused
805 2 unused
807 3 unused
809 4 unused
811 5 unused
813 6 unused
815 7 unused
817 8 unused
819 9 unused
821 10 unused
823 11 unused
825 12 unused
827 13 unused
829 14 unused

Keysight N9038A Specifications

General

Brand	Keysight
Model	N9038A
Category	Measuring Instruments
Language	English