Keysight N9038A - Service Equipment You will Need; Tools You will Need

28 Keysight N9038A MXE Service Guide
Overview
Service Equipment You Will Need
Service Equipment You Will Need
There are certain things that will be required to troubleshoot, adjust, and test
the MXE EMI Receiver. They include the following:
— Calibration Application Software
— Front End Controller Troubleshooting Kit
—USB Keyboard and Mouse
— USB Storage Device
— Test Equipment
Tools you will need
Figure 1-2 TORX Tool
Hand Tool Size
Cable Puller (5021-6773)
Nut Driver 3/16 inch
Nut Driver 5/16 inch
Nut Driver 9/16 inch
Open-End Wrench 5/16 inch
Torque Driver - Adjustable Multi Bit
Torque Wrench - 10 inch-lbs 5/16 inch
TORX Driver T-6
TORX Driver T-8
TORX Driver T-10
TORX Driver T-20