640 Keysight N9038A MXE Service Guide
Assembly Replacement Procedures
Front Frame Assembly
Figure 18-82 LCD and Display Bracket Separation - CCFL Backlight
Replacement
1. Refer to Figure 18-81. Place the display bracket into position in the Front
Frame Assembly. Reconnect the flex circuit A1W1 (2) to the front panel
interface board (4).
2. Replace the two screws (2) (0515-0372) that secure the display bracket
to the Front Frame Assembly. Torque to 9 inch pounds.
3. Replace the Inverter board.
To Next Page
Loading...
