Keysight N9038A Service Guide

656 Keysight N9038A MXE Service Guide
Post-Repair Procedures
Post-Repair Procedures
Figure 19-5 FPGA Programming Utility
6. To program the FPGA code enter 1 and press Enter. You will need to
confirm this selection by pressing 1 and Enter one more time.
7. The programming of the FPGA code could take a few minutes to complete.
Once it has finished the instrument will reboot itself to use the new code
and this process will then be completed.

Keysight N9038A Specifications

General

Brand	Keysight
Model	N9038A
Category	Measuring Instruments
Language	English