Key Description
OK To store the changes.
Page To change to another page on this panel.
Description of fields
Field Option Description
Elevation Editable field The entered elevation is stored with the
poin
t and used to calculate the cut and fill
values.
Cut/Fill Display only Height of the point being stored
– Entered elevation
-----------------------------------------
= Cut or fill value (always positive)
Examples
For cut:
Height of the point being stored
– Entered elevation
-----------------------------------------
Result > 0
598.5672 m – 596.4856 m = 2.0816 m = cut
The displayed value is 2.0816 m.
For fill:
Height of the point being stored
– Entered elevation
-----------------------------------------
Result < 0
598.5672 m – 599.7826 m = -1.2154 m = fill
The displayed value is 1.2154 m.
Information Editable field Additional information that must be stored
with the eleva
tion.
Only the entered Information which also has
an entered elevation is stored to the point
being stored.
Next step
Page
changes to the next page.
Available when the edited point is Class: Measur
ed.
The point code and code information can be edited. All point codes in the job
can be selected.
The description of the code is shown as a display only field.
The attributes are shown as display only, editable fields or selectable lists
depending on their definition.
The attribute values shown depend on the setting in Coding. Suggested
attribute values: Last used shows the last used attribute values which are
Point ID,
Code page
Job Menu - View & edit data 87
To Next Page