Diagnostic aids 3-35
5026
Automatically Display Error Screens
Selections include On (default) and Off (default).
When On is selected, the operator panel automatically displays any existing printer-related IR after the device
remains inactive on the Home screen for a length of time equal to the Screen Timeout setting. Any IR that
appears on the operator panel will display the option to return to the Home screen without clearing it. Once the
device returns to the Home screen, though, any existing IR again will appear after the device remains inactive
on the Home screen for a length of time equal to the Screen Timeout setting.
Note: SFPs and MFPs use a different default value for this setting in order to preserve their legacy behavior
with respect to IRs.
Exit Config
Exits the Configuration Menu. The printer performs a power-on reset and returns to normal mode.
To Next Page
Loading...
Need help?
General
