Lexmark CS748de - Operator Panel Assembly Removal (C746)

4-34 Service Manual
5026
Go Back
Previous
Next
Operator panel assembly removal (C746)
See operator panel assembly with card on page 7-3 for the part number.
Warning: This part might contain customer confidential information. See “Data Security Notice” on page 4-1
for more details. After removing this part, return it to your next level of support so any data can be
removed. If the customer requests to keep the part, they must sign a confirmation of memory device
retention form.
Warning: When replacing any one of the following components:
• Operator panel assembly
• System board
• Top access cover assembly
Only replace one component at a time. Replace the required component, and perform a POR before
replacing a second component listed above. If this procedure is not followed, the printer will be
rendered inoperable.
1. Remove the top access cover assembly. See “Top access cover assembly removal” on page 4-54.
2. Turn the top access cover assembly over.
3. Remove the eight screws (A) securing the position guide cover.
A