3-56 Service Manual
7562
Checking the base printer skew
1. Enter the Diagnostics menu: turn off the printer, press and hold 3 and 6, turn on the printer, and then
release the buttons when the splash screen appears.
2. Navigate to:
REGISTRATION > Quick Test
3. Measure from the edge of the paper to the black line to find L1, L2, T1, T2, R1, R2, B1, and B2 as shown
below.
4. Determine the following calculations:
Note: Each number is an absolute value.
• L2-L1 = ___
• R2-R1 = ___
• T2-T1 = ___
• B2-B1 = ___
To Next Page
Loading...
