LG IPECS - Page 100

IPECS Release 5
Feature Description & Operation 5.0
2-85
iPECS Phone users may assign a Flex button to select Headset or Speakerphone operation. The
{
HEADSET SELECT} button may be used to toggle the operation of the phone between Headset and
Speakerphone.
Operation
iPECS Phone
To assign a Flex button for {
HEADSET SELECT}
[
PGM] + {FLEX} + [PGM] + ‘61’ + [SAVE]
To change operation from Speakerphone to Headset
1. Press the [
PGM] button.
2. Dial ‘61’, the Headset select code.
3. Dial ‘0’ to select Headset, ‘1’ to select Speakerphone.
Or,
1. Press {
HEADSET SELECT}.
To change the device to receive ring signals
1. Press the [
PGM] button.
2. Dial ‘62’, the Ring select code.
3. Dial ‘1’ for Speaker, ‘2’ for Headset or ‘3’ for both.
To place/answer calls using the headset
1. Press the [
SPEAKER] with the phone in Headset mode.
Conditions
1. The Intercom Signaling Mode can be set in the Headset mode as with the Speakerphone mode.
2. The station always receives Page announcements over the speaker of the iPECS Phone.
3. Although the phone is in the headset mode, the system will monitor the hook-switch status. If
the user lifts the handset to go off-hook, audio is delivered to the handset.
Programming
STATION 1. Speaker/Headset Ring Mode (PGM 111-Btn 8)
2. Speakerphone/Headset (PGM 111-Btn 9)
Related Features
Speakerphone
Paging
Hardware