IPECS Release 5
Feature Description & Operation 5.0
3-1
3. INTERCOM
3.1 DIRECT STATION SELECT/BUSY LAMP FIELD (DSS/BLF)
Description
When a Flex button on an iPECS Phone or DSS Console is assigned as a {DSS} button, it also
serves as a Busy Lamp Field. The LED indicates the status of the associated station or system
facility.
Operation
iPECS Phone
Operation of this feature is automatic for assigned Flex buttons.
Conditions
1. A station receiving ICM ringing is considered busy and the associated station LED on all
other stations will flash at 30 ipm.
2. A station receiving ICM ringing will receive visual indication by a flashing LED of the Flex
button associated with the calling station.
3. When a station receives a Camp-On the LED of a DSS button associated with the calling
station will flash.
4. The station is considered busy when:
x in use,
x receiving ICM Ring at an iPECS Phone,
x receiving any ring at an SLT.
Programming
Related Features
Intercom Call (ICM Call)
Station User Programming & Codes
Hardware
3.2 INTERCOM CALL (ICM CALL)
Description
A non-blocking ICM is available to all stations in the system. Users may place an intercom call to
other stations in the system by dialing applicable digits as defined in the system’s Numbering Plan.
Operation
iPECS Phone
To place an intercom call
1. Lift the handset or press the [
SPEAKER] button to receive ICM dial tone.
2. Dial station number or press {
DSS/BLF} button.
To Next Page
Loading...
