IPECS Release 5
Feature Description & Operation 5.0
2-65
2.28 DIAGNOSTIC/MAINTENANCE
Description
The system software incorporates various diagnostic and maintenance routines that may be “called”
remotely or locally through the systems RS-232 serial ports, a TCP/IP connection using a Web
browser established over IP networks or a PPP connection over ISDN. Routines that can be
accessed include trace functions at the device level, commands for diagnostics and maintenance,
and tools for manipulation at the OS level.
An optional Network Management System application is available providing remote access to the
system for maintenance and diagnostics. For details on the iPECS NMS application, refer to the
iPECS NMS Manual.
Operation
Conditions
Programming
Related Features
Hardware
2.29 DIAL-BY-NAME
Description
A name, up to 16 characters, may be assigned to each Station and System Speed dial. In addition,
each station may be assigned a 12-character name. When assigned, a user may place an intercom
call to another station or select a Station or System Speed dial using the name.
The user selects from one of three Dial-by-Name directories and enters characters employing 2 dial
pad buttons for each character. The system finds and displays the nearest match to the user entries.
The user may continue entering characters or scroll the directory at any point using the [
VOL UP]/[VOL
DWN
] button and select a name to call. The number associated with a selected name is displayed by
using the [
TRANS] button.
Operation
iPECS Phone
To use Dial by Name using a [
SPEED] button
1. Press the [
SPEED] button twice
2. Dial the desired directory, I: Intercom, U: User Speed Dial, S: System Speed Dial.
3. Search the directory using the [
VOL UP]/[VOL DOWN] button or by entering characters. See
Station Speed Dial for character entry procedure.
4. Press the [
SAVE] button to place the call.
To Next Page
Loading...
