IPECS Release 5
Feature Description & Operation 5.0
2-63
2.25 DATA LINE SECURITY
Description
Data transmitted over analog CO lines is subject to distortion and errors if system tones such as
Camp-On and Override are applied during transmission. To eliminate such errors, stations that use
analog data (modems or Fax) can be assigned to block incoming system tones.
Operation
System
System tones are automatically blocked when Data Line Security is assigned
Conditions
1. Stations or an Attendant attempting to Camp-On or Override a station with Data Line Security
will receive error tone.
2. When Data Line Security is enabled, the system will not apply audio gain to the call.
Programming
STATION 1. Data Line Security (PGM 111-Btn 4)
Related Features
Call Waiting/Camp-On
DND Override
Intrusion
Hardware
2.26 DELAYED CO/IP RING
Description
Ring signals for an incoming CO/IP call can be sent to stations immediately upon detection or after
an assigned ring cycle delay. The delay can be up to 9 system ring cycles, thus allowing other
stations to answer the call.
Operation
System
Delay Ring operation is automatic when assigned
Conditions
1. Delay Ring can be assigned for a station or Station Group.
2. If no delay is entered when programming Ring assignments, the station will receive immediate
ring.
3. Private Lines may be assigned with delayed ring.
4. If no station or Station Group is assigned for immediate ring, the call will ring immediately at the
first available Attendant.
To Next Page
Loading...
