IPECS Release 5
Feature Description & Operation 5.0
2-121
Related Features
CO Line Flash
Dial-by-Name
Display Security
Keypad Facility
LNR (Last Number Redial)
Dial Pulse to Tone Switchover
Save Number Redial (SNR)
Speed Dial Pause Insertion
System Speed Dial
System Speed Zone (Groups)
Hardware
2.64.5 System Speed Zone (Groups)
Description
System Speed Dial bins can be divided in to zones or groups. iPECS systems have 10 zones
available, except for the iPECS 600(1200), which has twenty (fifty) zones. To access a Speed Dial
bin assigned to a zone, the station must be allowed access to the Speed Dial Zone.
In addition, each zone can be assigned to apply COS dialing restrictions to the Speed Dial numbers
in the zone. When assigned, the system will apply the Station and CO/IP COS to calls using Speed
Dial numbers in a COS enabled zone.
Operation
Refer to System Speed Dial for operation.
Conditions
1. The conditions of System Speed Dial apply to System Speed Dial numbers assigned to a zone.
2. A station not assigned access to a zone will receive error tone when trying to access a System
Speed Dial number in the zone.
3. The Station COS is applied to the Speed Dial number based on the active service mode,
Day/Timed or Night.
Programming
STATION 1. Speed Dial Access (PGM 112-Btn 8)
T
ABLES 1. System Speed Zone (PGM 232)
Related Features
System Speed Dial
Class of Service
Hardware
To Next Page
Loading...
