LG IPECS - Centralized Voice Mail; Paging to Networked System

IPECS Release 5
Feature Description & Operation 5.0
2-150
2.69.2.17 Centralized Voice Mail
Description
This function can support that all voice mail occurred in all systems can be recorded in an external
VMS.
Operation
Refer to the External Voice Mail function in the system features.
Conditions
1. The centralize VMS should be assigned in slave system, and the number of the centralized VMS
should use the representative number of mail access created in master system.
2. The numbering plan including the representative of mail access assigned in master system should
be included in the numbering plan of QSIG group in slave system.
Programming
SYSTEM 1) Network Numbering Plan Table – (PGM 324 – BTN 6)
2) Centralized VMS Assign – (PGM 190)
2.69.2.18 Paging to Networked System
Description
A Station User can initialize a page announcement to other systems by dialing a pre-programmed
number or flex button just as if it were a page announcement within the same system.
Operation
1. Enter the Network Numbering plan code to the Network Numbering Plan Table (PGM324) as
Net a call in caller system.
2. Enter the Network Paging number and select the page type and destination from the Network
Feature Code Table (PGM325) of the called system.
3. Lift the Handset or press the [speaker] button; the System will provides a dial tone.
4. Dial the Network Paging number of the other System,
OR
<1>
<A> <B>
<2>
<3>
<4>
a
c
d
f
b
e