LG IPECS - CO Line Name Display; DID Call Wait

IPECS Release 5
Feature Description & Operation 5.0
5-7
5.7 CO LINE NAME DISPLAY
Description
When a CO/IP call is received or a user seizes a CO/IP path, the CO/IP number is displayed on
the LCD. If the CO/IP path is assigned a name and CO/IP Name Display is enabled, the CO/IP
name is displayed instead of the CO/IP number.
Operation
iPECS Phone
To display the CO/IP line name while calling
1. Press the {
CO}/{IP} button, or CO/IP Access code, LCD displays CO/IP line name.
Conditions
1. Each CO line and IP group is assigned a name of up to 12 characters in the system database.
Programming
CO/IP 1. CO Line Name Display (PGM 142-Btn 1)
2. CO Line Name Assign (PGM 142-Btn 2)
Related Features
Hardware
iPECS Phone w/Display
5.8 DID CALL WAIT
Description
When a busy iPECS Phone receives a DID call, the station can receive a visual indication for the
call, the {
DID CALL WAIT} button LED flashes. A Flex button must be assigned as {DID CALL WAIT}
button and DID Call Wait must be enabled by the user employing Station User Programming.
Operation
iPECS Phone
To assign a {
DID CALL WAIT} button:
[
PGM] + {FLEX} + [PGM] + ‘34’ + [SAVE]
To activate/deactivate DID call wait from an iPECS Phone:
1. Press the {
DID CALL WAIT} button.
2. Dial activate/deactivate code, ‘1’ or ‘2’ respectively.
Conditions
1. The {
DID CALL WAIT} button only flashes for incoming calls while the station is busy.
2. The DID call will follow the call routing defined in PGM code 167 after the expiration of the
DID/DISA no answer timer expires.