IPECS Release 5
Feature Description & Operation 5.0
2-50
Conditions
1. The LED of a {LOOP} or {POOL} button will display the status of a call until the station no longer
has call supervision i.e.; the call is successfully transferred.
Programming
STATION 1. Direct Transfer Mail Box Destination (PGM 120-Btn 6)
S
YSTEM 1. Transfer Recall Timer (PGM 180-Btn 7)
Related Features
Hold Recall
Call Waiting/Camp-On
External Auto Attendant/Voice Mail
VMIM/VSF Voice Mail
Hardware
iPECS Phone
2.18 CALL WAITING/CAMP-ON
Description
Call Waiting is used to notify a busy station that a call is waiting to be answered. The busy station is
notified of the waiting call by a ‘Camp-On’ tone. For users of an iPECS Phone, the LED of the
[
HOLD] button will flash.
After receiving a busy signal, the calling station camps on to the called station. The called station
can respond by:
a. answering the waiting call, which places the active call on hold first,
b. sending a silent text or voice message,
c. activating One-Time DND, or
d. ignoring the Camp-On tone.
Operation
iPECS Phone
To activate a Camp-On while receiving Intercom busy tone
1. Press the ‘*’ button, called and calling stations receive Camp-On tone.
SLT
To activate a Camp-On while receiving Intercom busy tone
1. Press the ‘*’ button, called and calling stations receive Camp-On tone.
Conditions
To Next Page
Loading...
