IPECS Release 5
Feature Description & Operation 5.0
5-3
2. The call will be placed on the same path as originally used. If the path is busy, an available
CO/IP line in the same group will be seized.
3. The ACNR Retry Counter decrements by one when the system completes the dialed number.
4. When the ACNR Pause Timer expires, if the station is in a busy state, the ACNR Delay Timer
is invoked.
5. Upon completion of dialing, the system will monitor the call for progress signals.
Programming
S
YSTEM 1. ACNR Delay Timer (PGM 180-Btn 8)
2. ACNR Pause Timer (PGM 180-Btn 9)
3. ACNR Retry Counter (PGM 180-Btn 10)
4. ACNR Tone Detect Timer (PGM 180-Btn 11)
Related Features
LNR (Last Number Redial)
Speakerphone
Mute
Hardware
iPECS Phone
5.3 AUTO RELEASE OF [SPEAKER]
Description
After completion of certain features, the [
SPEAKER] turns off automatically, returning the iPECS
Phone to idle.
Operation
System
Auto Release of [
SPEAKER] operation is automatic for supported features, see conditions below.
Conditions
1. This feature applies to all User and Attendant Programming except Custom Message, CO/IP
line Disable and Version Display. Auto Release of [
SPEAKER] also applies to features
including Call Park, Call Back, Call Forward and CO/IP Queuing.
2. If, during Station User Programming, erroneous data is entered, error tone is received and
the user must correct the error before the station will return to idle automatically.
Programming
Related Features
Hardware
iPECS Phone
To Next Page
Loading...
