IPECS Release 5
Feature Description & Operation 5.0
5-8
3. When multiple DID calls are waiting for the station, only the last call is indicated by the {DID
CALL WAIT
} button LED.
4. The iPECS Phone must have an appearance button for the DID line.
5. Assigning the ICLID Timer, which enables ICLID routing, for a DID line, disables DID Call
Wait.
Programming
S
TATION 1. DID Call Wait (PGM 113-Btn 9)
CO/IP
LINE 1. ICLID Timer (PGM 142-Btn 14)
S
YSTEM 1. DID/DISA Destination (PGM 167)
2. DID/DISA No Answer Timer (PGM 181-Btn 2)
Related Features
Direct Inward System Access (DISA)
Direct Inward Dial (DID)
ICLID Call Routing
Hardware
iPECS Phone
5.9 DND - ONE TIME DND
Description
A station, which is ringing or receiving Off-hook muted ring, can press the [
DND] button, to reject
the call and terminate ringing. The station is placed in DND, ringing terminates and the call
receives treatment based on the following precedence:
1. Previous or active Call Forward busy.
2. Preset Call Forward busy.
3. Station Call Coverage.
4. Direct Transfer to Voice Mailbox.
5. Return busy signal and disconnect.
When the station returns to the idle status, DND is cancelled and the [
DND] LED is extinguished.
Operation
iPECS Phone
To activate One Time DND while on a call
1. Press the [
DND] button, the [DND] LED lights, station goes to DND state.
System
Deactivation
1. When the station returns to idle, DND is disabled and the [
DND] LED extinguishes.
To Next Page
Loading...
