LG IPECS - Message Wait Reminder Tone; Paging; Internal;External & All Call Page

IPECS Release 5
Feature Description & Operation 5.0
3-15
Programming
SYSTEM 1. Message Reminder Tone Timer (PGM 181-Btn 8)
Related Features
Message Wait Reminder Tone
CLI Message Wait
Hardware
3.9.4 Message Wait Reminder Tone
Description
In addition to the [MSG/CALLBK] button LED, the iPECS Phones can be sent a tone as a periodic
reminder to the user of message waits in queue. This tone is sent to the station only while idle and
is heard over the speaker.
Operation
System
Reminder tone is sent to stations automatically when assigned.
Conditions
1. The interval between tones can be 00 to 60 minutes. A setting of 00 disables the reminder
tone.
2. The reminder tone will continue until all messages have been retrieved.
3. A busy station or station in DND will not receive the Message Wait Reminder tone.
Programming
SYSTEM 1. Message Reminder Tone Timer (PGM 181-Btn 8)
Related Features
Message Wait/Call Back
Hardware
iPECS Phone
3.10 PAGING
3.10.1 Internal/External & All Call Page
Description
A station, which is permitted to access page facilities, can connect and transmit voice
announcements to any or all of the systems Internal/External Page zones. Stations are grouped
into “zones” to receive pages to the zone. Stations not assigned to any zone will not receive a
page including All Call pages.