IPECS Release 5
Feature Description & Operation 5.0
3-14
1. Press ‘*’ button, the list is updated removing the first station number in the list.
To delete all Message Waits
1. Press [
SPEED] button.
2. Press ‘*’ button twice.
SLT
To leave a Message Wait, while receiving ring back tone or no response on a call announce (H or
P mode)
1. Momentarily press the hook switch.
2. Dial ‘556’, the Message Wait/Call Back code.
3. Hang up, Message Wait activated.
To leave a Message Wait, while receiving DND tone
1. Momentarily press the hook switch.
2. Dial ‘556’, the Message Wait/Call Back code.
3. Hang up, Message Wait activated.
To retrieve a Station Message Wait;
1. Dial ‘557’, the Message Wait/Call Back Answer code.
To leave a Call Back (queue for a station), while receiving busy
1. Momentarily press the hook switch.
2. Dial ‘556’, the Message Wait/Call Back code.
3. Hang up, return to idle.
To respond to a Call back recall, when the busy station is available the system calls back,
1. Lift the handset.
2. Previously busy station is called.
Conditions
1. A Message Wait/Call Back return call will always ring at the receiving station overriding the
Intercom signaling mode selected.
2. A station can leave only one callback request.
3. The [
MSG/CALLBK] button LED will continue to flash until all Message Wait and Call Back
requests, including Voice Mails, have been serviced.
4. If a station is attempting to leave a message and the system Message Wait queue is full, the
station will receive ICM busy tone.
5. A Message Wait remainder tone can be enabled to remind the user of messages waiting.
6. A station in Call Forward can leave a message wait.
7. A Message Wait indication is left at the originally called station even if the call is forwarded.
8. An iPECS Phone with LCD may call back to stations that left messages in any desired order,
or the normal (“oldest first”) order.
9. Placing an Intercom call to a station will cancel any existing Message Wait from that station.
To Next Page
Loading...
