IPECS Release 5
Feature Description & Operation 5.0
2-172
‘662’ for IPECS-Micro & 50 & 100
‘*662’ for all other systems
announcement for station is heard, “This is station 150”.
To hear Station Settings
1. Lift the handset.
2. Dial feature code,
663 IPECS-Micro & 50 & 100
*663’ for all other systems
status for station is reported. Items that will be reported are as follows:
Station number
Station IP Address
Station Mac Address
Station ICM Mode Handsfree/Tone/Privacy)
Listed message x (the number of all message waiting)
Wake-Up Time (hh:mm)
Do not disturb
Forwarded to station xxx
Forwarded to speed bin xxx
Queued CO/IP xx
Locked (temporary COS change)
COS x
Conditions
1. For station status, items from “Listed message x” to “COS x” will be not be announced if not
active.
Programming
STATION 1. VSF Access (PGM 113-Btn 2)
Related Features
VMIM/VSF
Hardware
VSF and/or VMIM
2.73 WAKE-UP ALARM
Description
This feature allows a user or Attendant to set a wake-up time or desired time to be alerted. When
the time is reached, the system will signal with an audible and visual signal.
Operation
Attendant
To register Wake-Up
To Next Page
Loading...
