IPECS Release 5
Feature Description & Operation 5.0
5-15
5.16 OFF-HOOK SIGNALING
Description
When a station, which is off-hook, receives a call or a CO/IP call rings into the system for the off-
hook station, the station will receive the assigned Off-hook ring signal or, for ICM calls, a Camp-On,
Voice-Over Announcement or Off-hook ring signal may be received.
The Off-hook ring Signal may be either a muted normal ring signal or a single tone burst based on
the system assignment. This signal is delivered to the iPECS Phone speaker.
Operation
System
Operation of Off-hook ring signals is automatically controlled.
Conditions
1. While using the speakerphone, a Camp-On tone is provided over the speaker in place of the
assigned Off-hook ring Signal.
2. Activating the DND or One-Time DND places the station in DND, terminating any Off-hook
signaling.
3. Off-hook ring signals terminate when the call is answered, forwarded, or abandoned.
4. A station, which is receiving Off-hook ring signals, will receive normal ring upon return to idle
status.
Programming
CO/IP 1. CO Line Ring Assignment (PGM 144)
S
YSTEM 1. Off-Hook Ring Signal Type (PGM 161-Btn 1)
Related Features
Call Waiting/Camp-On
CO/IP Ring Assignment
DND (Do Not Disturb)
DND - One Time DND
Hardware
iPECS Phone
To Next Page
Loading...
