IPECS Release 5
Feature Description & Operation 5.0
3-3
Operation
iPECS Phone
To place an active ICM call on hold
1. Press the [
HOLD] button, the [ICM] button LED will flash at the exclusive hold rate. ICM dial
tone is received.
To retrieve the held ICM call
1. Press the [
ICM] button or the {DSS/BLF} button associated with the held station, the [ICM]
button LED illuminate and the ICM call connected.
Conditions
1. Only one ICM call may be placed on hold at a station.
Programming
Related Features
MOH (Music-On-Hold)
Intercom Call (ICM Call)
Exclusive Hold
Hold Recall
Hardware
iPECS Phone
3.4 INTERCOM CALLER CONTROLLED ICM SIGNALING
Description
A user can change the signaling mode of an Intercom call from Tone ring to Voice announce or
Voice announce to Tone ring.
Operation
iPECS Phone
To change the ICM Signaling mode;
1. Place intercom call.
2. Dial ‘#’, ICM Signaling mode will change from Voice announce to Tone ring or Tone ring to
Voice announce.
SLT
To change the ICM Signaling mode;
1. Place intercom call as normal.
2. Dial ‘#’, ICM Signaling mode will change from Voice announce to Tone ring or Tone ring to
Voice announce.
To Next Page
Loading...
