IPECS Release 5
Feature Description & Operation 5.0
2-105
5. Dial the Language number, only required with multi-language support. The current
announcement is played followed by the “Press # to record” prompt.
6. Dial ‘#’.
7. After the beep-tone, record message.
8. Press the [
SAVE] button to stop recording and save the message.
Conditions
1. The internal source is provided as MOH when MOH Source 0 is selected in the system
database.
2. The BGM1 RCA jack on the front panel of the MFIM and the BGM1 input via the rear panel RJ-
11 jack are common. The external music source should only be connected to one of the inputs.
3. Only VMIM/VSF announcement number 71 may be used for the MOH message.
4. The iPECS-50 only has a single MOH/BGM source input.
5. The iPECS-Micro only has a single virtual MOH/BGM source input.
Programming
CO LINE 1. MOH (PGM 142-Btn 6)
S
YSTEM 1. MOH Type (PGM 171-Btn 2)
RSGM 1. MOH Type (PGM 434-Btn 1)
Related Features
Hold
Back Ground Music
Multiple Language Support
Hardware
External Music source connected to MFIM music source input.
2.57 NETWORK MANAGEMENT SYSTEM
Description
iPECS NMS is a Web-based application for monitoring and management of multiple iPECS systems
using standard SNMP (Simple Network Management Protocol). iPECS NMS is an efficient
convenient tool employing standards based protocols and a Web based architecture to permit
administrators remote access to iPECS systems using any common Web browser. iPECS NMS
monitors multiple systems displaying real-time detailed status information for the system devices and
channels. iPECS NMS maintains a log of alarm and fault events defined by the administrator and
can alert administrators of potential service affecting faults. In addition, call statistics are maintained
and can be reported with various tables and graphs.
Operation
Operation of iPECS NMS is automatic once configured
To Next Page
Loading...
