IPECS Release 5
Feature Description & Operation 5.0
2-115
Conditions
1. The number is displayed when programming the Speed Dial number.
2. Display Security does not affect the SMDR output.
3. Display Security is provided on all CO/IP calls including calls that are transferred or recall.
4. An “*” in any digit position other than the first, will activate Pulse to Tone Switchover.
Programming
Related Features
Dial Pulse to Tone Switchover
Speed Dial
Hardware
2.64.2 Speed Dial Pause Insertion
Description
A pause dialing command may be inserted in a Station or System Speed Dial number. When
encountered, the system will stop dialing the Speed Dial number for the assigned “pause” duration.
Multiple pauses ([
HOLD] button depressions) may be inserted into a Speed Dial number.
Operation
System
Pause operation is automatic when encountered; see Station or System Speed Dial for pause entry
Conditions
1. The timed pause is used only with analog CO lines.
Programming
SYSTEM 1. Pause Timer (PGM 181-Btn 10)
Related Features
Station Speed Dial
System Speed Dial
Hardware
2.64.3 Station Speed Dial
Description
Each user can store commonly dialed numbers for easy access using Station Speed Dial bins. With
the iPECS-Micro, iPECS-50 and 100, each station has access to 20 Speed Dial numbers and, with
other iPECS systems, each station has access to 100 Speed Dial numbers. Each Speed Dial
number can be up to 48 digits in length and may include special instruction codes.
To Next Page
Loading...
