LG IPECS - Page 131

IPECS Release 5
Feature Description & Operation 5.0
2-116
Special instruction codes available are:
‘*’ as 1
st
digit Activate Display Security, do not display number.
Flash as 1
st
digit Activate dial tone detect.
‘#’ Insert a pause dialing command.
‘*’ not 1
st
digit Switch from Pulse to DTMF dialing.
[
MSG/CALLBK] Send as ISDN Keypad Facility IE.
[
HOLD] Insert a Pulse to tone switchover
iPECS Phone users may assign a Flex button for One-Touch access to a specific Speed Dial bin. In
addition, the iPECS Phone user may assign a Telephone number directly to a Flex button. In this
case, the telephone number is allocated to the highest numbered available Station Speed Dial bin.
Operation
iPECS Phone
To assign a Flex button as a {
STATION SPEED DIAL} button
[
PGM] + {FLEX} + [SPEED] + Station Speed Dial bin number + [SAVE]
To dial using a Station Speed Dial with a [
SPEED] button
1. Lift handset or press the [
SPEAKER] button.
2. Press the [
SPEED] button.
3. Dial the desired bin number.
To dial using a Station Speed Dial and the LIP 8000 series soft buttons
1. Press the [
DIR] soft button
2. Press the [
SPEED] soft button
3. Dial the desired bin number.
To program a Station Speed Dial number using the [
SPEED] button
1. Press the [
PGM] button.
2. Press the [
SPEED] button.
3. Dial the Speed Dial bin number.
4. Press the {
CO}/{IP}, {LOOP}, or {POOL} button or dial the CO/IP line/group access code.
5. Dial the number to be stored.
6. Press the [
SAVE] button.
7. If desired, enter a name, see alphanumeric entry chart below.
8. Press the [
SAVE] button.
To program a Station Speed Dial number using the LIP-8000 series soft buttons
1. Press the [
DIR] soft button
2. Press the [
SPEED] soft button
3. Press the [
ADD] soft button
4. Dial the Speed Dial bin number.
5. Press the {
CO}/{IP}, {LOOP}, or {POOL} button or dial the CO/IP line/group access code.
6. Dial the number to be stored.
7. Press the [
SAVE] button.