LG IPECS - Flex Button Direct Speed Dial Assignment

IPECS Release 5
Feature Description & Operation 5.0
5-9
Conditions
1. CO/IP recalls will override One Time DND.
2. The Attendant can override stations in One Time DND by using Camp-On or intrusion. The
Attendant does not have One Time DND service.
3. One Time DND cancels existing Callback queues.
4. When activated, One Time DND will display the DND message “DO NOT DISTURB STA
[XXX]” to a station attempting to camp-on.
Programming
S
TATION 1. DND (PGM 111-Btn 3)
2. Call Forward (PGM 111-Btn 2)
3. Preset Call Forward (PGM 120)
4. Direct xfer to Mail box (PGM 120-Btn 6)
S
YSTEM 1. System Call Forward No Answer Timer (PGM 181-Btn 1)
Related Features
Call Waiting/Camp-On
DND (Do Not Disturb)
Call Forward
Call Forward, Preset
Station Call Coverage
Hardware
iPECS Phone
5.10 FLEX BUTTON DIRECT SPEED DIAL ASSIGNMENT
Description
A user may program a telephone number directly to a Flex button without the need to assign the
number to a Speed Dial bin. In this case, the telephone number is allocated to the highest
numbered Station Speed Dial bin available.
Operation
iPECS Phone
To assign a telephone number to a Flex button;
1. Press the [
PGM] button.
2. Press the desired Flex button.
3. Press the soft button below the “TEL NUM” display selection or, for iPECS 24D and 24DH
phones, press the [
ICM] button.
4. Press the CO/IP line button or dial the CO/IP line access code.
5. Dial the telephone number.
6. Press the [
HOLD/SAVE] button
7. Dial the name to be associated with the number (optional).
8. Press the [
HOLD/SAVE] button.