IPECS Release 5
Feature Description & Operation 5.0
2-88
To access a call on Exclusive Hold from the holding SLT
1. Lift the handset.
2. Dial ‘8#’, the Held CO/IP Call Access code.
3. Dial the CO/IP line number.
Conditions
1. When a CO/IP line is placed on Exclusive Hold, the button LED will flash at 120 ipm at the
holding station and will be On at all other stations.
2. All Transferred CO/IP calls are placed on Exclusive Hold for the receiving station.
3. The LED of {
LOOP} and {POOL} buttons will display the CO/IP line status.
Programming
SYSTEM 1. Hold Preference (PGM 160-Btn 7)
2. Attendant Recall Timer (PGM 180-Btn 1)
3. Exclusive Hold Recall Timer (PGM 180-Btn 4)
4. I-Hold Recall Timer (PGM 180-Btn 5)
5. Transfer Hold Recall Timer (PGM 180-Btn 7)
Related Features
Call Transfer, CO/IP
Hold Preference
Hold Recall
System Hold
Hardware
2.41.4 System Hold
Description
CO/IP lines may be placed in a waiting state such that other stations in the system are able to
access the CO/IP line. Stations must have access to the CO/IP line in the system database to
access the held call.
If the call remains on hold at expiration of the System Hold Recall Timer, normal Hold Recall will
apply.
Operation
iPECS Phone
To place a call on System Hold
1. Press the [
HOLD] button.
To access a call from System Hold
1. Lift the handset or press the [
SPEAKER] button.
2. Press the {CO}/{IP} line button
To Next Page
Loading...
