LG IPECS - Do-Not-Disturb (DND); CAS) Attendant Call

IPECS Release 5
Feature Description & Operation 5.0
2-149
2.69.2.15 Do-Not-Disturb (DND)
Description
A call to a station in DND mode can be denied though it is arrived from a station of other systems.
The calling party will be heard a busy tone.
Operation
1. Go to DND mode at a station.
2. From a station of other system, dial the station number in DND mode.
The caller hears a busy tone with LCD display through the network.
The DND station does not receive any ring signal.
Conditions
When a station is in DND mode, the [NET DSS] of DND station is flashing if BLF manager is
activated.
Programming
2.69.2.16 (CAS) Attendant Call
Description
The attendant call from any node can be routed to the centralized attendant.
This call will be queued when all centralized attendants are busy.
Operation
1. Assign Net DSS to the attendant (except system attendant) in PGM 164.
2. System attendant press ATD DND button.
3. Dial attendant code at any station in the system, then the call will be routed to the Net attendant.
The system provides ring-back tone to the calling station, and the [Net DSS] button lights.
To assign [ATD DND] button:
[PGM] + {Flex Button} + [PGM] + 83 + [SAVE]
Conditions
1. ICM Call is routed to Net attendant if system attendant press ATD DND button and the next
attendant is Net attendant.
2. CO Call can be routed to Net attendant only if DID/DISA destination is ATD and the ring is not
assigned to any station.
Programming
STATION Attendant DND Button (PGM 115 – STN PGM 83)
SYSTEM Net Attendant Assign (PGM 164)
Net DSS cannot be assigned to the System Attendant.
DID/DISA Destination (PGM 167)
CO Ring Assignment (PGM 144)