LG IPECS - Intercom Lock-Out

IPECS Release 5
Feature Description & Operation 5.0
3-4
Conditions
1. The ICM Signaling mode cannot be changed when an Intercom call is placed to a Linked Pair
station.
2. If the signaling mode is changed, the call is not subject to Call Forward, No Answer.
3. The signaling mode for a specific Intercom call can only be changed once and cannot be
changed back to the original signaling mode.
4. Changing the signaling mode does not affect privacy at the called station.
Programming
STATION 1. Caller Controlled ICM Signaling (PGM 111-Btn 15)
Related Features
Intercom Signaling Mode
Linked Station Pairs
Hardware
3.5 INTERCOM LOCK-OUT
Description
If the user takes no action after going off-hook for the Dial Tone timer or fails to dial an additional
digit within the Inter-digit timer, the station will receive error tone for 30 seconds and be placed out-
of-service (locked-out). The LED of associated {
DSS/BLF} buttons as well as the station’s [ICM]
button flutter rapidly to indicate the out-of-service state.
For iPECS Phone users, if the [
SPEAKER] is used, the station will receive error tone for 30 second
and then automatically return to idle.
Operation
System
Operation of Intercom Lockout is automatic based on the Dial Tone & Inter-digit timers.
Conditions
1. If the station is assigned Howler Tone, error tone is presented for 30 seconds followed by 30
seconds of Howler tone followed by lockout and silence.
Programming
STATION 1. Howler Tone (PGM 111-Btn 5)
S
YSTEM 1. ICM Dial Tone Timer (PGM 181-Btn 6)
2. Inter Digit Timer (PGM 181-Btn 7)
Related Features
Intercom Call (ICM Call)
Hardware