LG IPECS - Silent Text Message

IPECS Release 5
Feature Description & Operation 5.0
5-20
5.21 SILENT TEXT MESSAGE
Description
Silent Text Messaging is used to respond to an OHVO call without disconnecting the existing call.
Silent Text Messages are sent by pressing a pre-programmed message button or [
DND] button.
Operation
iPECS Phone
To program a {
TEXT MESSAGE} button
[
PGM] + {FLEX} + [PGM] + ‘51’ + Display Message code (‘00’-‘20’) + [SAVE]
To respond to an Off-Hook Voice Over call with a Text message
1. Upon receiving announcement, press the desired {
TEXT MESSAGE} or [DND] button, text
message is sent to the display of the calling party, OHVO call is terminated.
Conditions
1. Silent Text Messaging employs the Custom Message/Pre-defined Display Messages.
2. When Silent Text Messaging is used to respond to an OHVO call, the existing call will not be
disconnected.
3. When a SLT places the OHVO call, the receiving station will receive the “NO DISPLAY
AVAILABLE” message and error tone to indicate Silent Text Messaging is not available to the
SLT.
Programming
S
TATION 1. Voice Over (PGM 113-Btn 6)
Related Features
Call Waiting/Camp-On
Group Listening
Voice Over
Pre-defined & Custom Text Display Messages
Hardware
iPECS Phone