LG IPECS - Multiple Voice Mailbox Support

IPECS Release 5
Feature Description & Operation 5.0
2-103
5. Dial the Language number, only required with multi-language support. The current
announcement is played followed by the “Press # to record” prompt.
6. Dial ‘#’.
7. After the beep-tone, record message.
8. Press the [
SAVE] button to stop recording and save the message.
Conditions
1. The Language Selection prompts must be recorded as announcement number 72.
2. Multi-language support is only available with the VMIM and VSF.
3. Separate announcements must be recorded by the Attendant for each language supported.
Programming
SYSTEM 1. Multi-language (PGM 179)
Related Features
VMIM/VSF Integrated Auto Attd/Voice Mail
Direct Inward Dial (DID)
Station Groups
Announcements
Direct Inward System Access (DISA)
Hardware
VSF and/or VMIM
2.55 MULTIPLE VOICE MAILBOX SUPPORT
Description
A station can access any Voice Mailbox by dialing the VM group, the mailbox number and password.
iPECS Phone users may assign one or more Flex buttons to access a specific mailbox and receive a
visual indication (LED flashes) of message status in the mailbox. A Flex {
VMAILBOX} button is
assigned to allow access to multiple Voice Mailboxes.
Operation
iPECS Phone
To assign a {
VMAILBOX} Flex button;
[
PGM] + {FLEX} + VM group + Mail-box (station) number + [SAVE]
To access a Voice Mailbox using the {
VMAILBOX} Flex button;
1. Lift the handset or press the [
SPEAKER].
2. Press the {
VMAILBOX} Flex button.
3. Dial the Mailbox password.