IPECS Release 5
Feature Description & Operation 5.0
7-1
7. SLT
7.1 BROKER CALL
Description
Broker Call allows an SLT user to engage in two (2) calls, alternating between the two parties, so
that the conversation with each party is private.
There are two types of Broker Call, Transfer and Camped On.
Transfer Broker Call
: 2nd Call is originated by SLT user.
Camped On Broker Call
: 2nd Call is delivered to the SLT through a Camp-On.
Operation
SLT
To activate a Transfer Broker Call
1. Make or receive an intercom or external call.
2. Momentarily press the hook-switch, intercom dial tone received and active call is placed in
Exclusive hold state.
3. Place second call.
4. To alternate between calls momentarily press the hook-switch.
To activate a Camp-On Broker Call
1. Make or receive an intercom or external call.
2. Receive a Call Waiting/Camp-On tone.
3. Momentarily press the hook-Switch, intercom dial tone received and the active call is placed
on Exclusive Hold.
4. Dial the Camp-On Answer feature code ‘600’, camped on call is connected
To alternate between the calls
1. Momentarily press the hook-switch.
2. Dial the Camp-On Answer feature code ‘600’.
Conditions
1. After a hook-switch flash, if the call results in an error, busy, no answer or an abnormal state,
the SLT user may momentarily press hook-switch to retrieve the held call.
2. During a Transfer Broker Call, if the SLT user goes on-hook, the Broker Call parties are
connected completing a Call Transfer.
3. During a Transfer Broker Call, if the active caller disconnects from the SLT user, the held
party, if another station, is connected to the SLT. If the held party is an CO/IP call, the SLT
user receives error tone and may go on-hook to receive recall and retrieve the held call
4. During a Camp-On Broker Call, if the SLT user goes on-hook, the active call is disconnected
and the held call recalls to the SLT.
5. During a Camp-On Broker Call, if the active party disconnects from the SLT, the SLT user
receives error tone. The SLT user may momentarily press the hook-switch to retrieve the
held party or go on-hook and receive recall.
To Next Page
Loading...
