LG IPECS - Page 290

IPECS Release 5
Feature Description & Operation 5.0
6-21
Conditions
1. The time is entered as a 24-hour (military) clock, 24-hour mode.
2. If an NTP server is assigned, the system will check the time every ten (10) minutes. If the
system time is more than 10 seconds off of the NTP time, the system time is reset. This will
override the Attendant setting.
Programming
S
YSTEM 1. Network Time/Date (PGM 161-Btn 12)
2. System Attendant (PGM 164-Btn 1)
3. System Time (PGM 178-Btn 1)
4. System Date (PGM 178-Btn 2)
5 DST Enable (PGM 178 – Btn 3)
6. DST Start & End Time (Web only)
. 7. NTP Active (PGM 195 – Btn 1)
8. NTP Sever address (Web only)
9. Std system time, local Time Zone (Web only)
Related Features
LCR (Least Cost Routing)
SMDR (Station Message Detail Recording)
Auto Service Mode Control
Automatic System Time Synchronization
Automatic System Daylight Savings Time
Day/Night/Timed/Scenario Ring Mode
Hardware